Unprepped 3D print. There may be very small print lines that are easily buffed out or covered with primer. Remnants (very small bumps) of where the supports were attached are removed, but there may be a few that need to be sanded down.

Micro Mini Strength & Curing

Our 3D prints have accurate curing time for the different sizes that they are. Each model is processed in a professional printing lab using high quality equipment. The first thing that you may notice is that they are not dry and brittle. We use proper curing time and equipment. Your micro will not arrive dry and brittle, and also not under cured and sticky. Each micro is properly cleaned and carefully packaged.

Once painted and sealed (or just primed) there is no need to keep them away from sunlight. But you would want to keep them out of sunlight until that process is complete.

Our micros are refined. The tiny legs of the Charm models may also be moved back in to place without heat… just pressure (as with the Pewter micros). Once primer and paint are added to their little legs then they can no longer be moved and the legs have even more substance to them. The refinement will remain after finishing work is completed.

We use currently updated 3D printers with the highest detail and quality available. Due to the color and translucency of the resin used, details usually do not show up well in photos.

For more photos, and a painted gallery, visit the main page for the traditional size model....